DB-M

DB-M

Product Bio

Developed for velocity-sensitive applications to deal with very lightweight dust particles, the DB-M creates a cloud of atomized water droplets without using a fan that would contribute unwanted turbulence. The DB-M was designed to be customizable for specific operating conditions and particle behaviors, giving users a versatile, skid-mounted dust management solution.

Get the Spec Sheet!

General Specs

  • Throw is dependent on wind conditions. Approximately 30 feet (9.14 meters) on a quiet day
  • Misting head with 9 nozzles mounted on 15-foot boom
  • Nozzles can be added or removed to suit the application

Electrical Specs

  • U.S.: 3 Phase / 480 Volt / 60 Hertz
  • Full load current is 12 amps. Recommended minimum gen set is 25 Kw
  • 100 foot (30.48 meters) 10/4 electrical cord. Other options available
  • Bare wired electrical cord (no male plug)

Water Specs

  • 10 PSI (0.69 BAR) constant pressure must be delivered to booster pump.
  • Maximum PSI delivered by booster pump is 250 PSI (17.24 BAR).
  • Filter is included and should be used at all times. Contact us for recommendations when using non-potable water. (Filter system in-line 30 mesh 595 micron)

Dimensions

  • Standard boom height is 15 feet (4.57 meters) tall when mounted on skid
  • Units can be fabricated on booms ranging from 4 to 15 feet (1.22 to 4.57 meters) in height

Additives

  • Can be used with surfactant to improve binding of dust particles or with tackifying agents to seal the ground to prevent dust from becoming airborne.
  • Odor control chemicals can be used to help eliminate odor
  • Dosing Pump can be added to the unit for chemical applications

Warranty

  • Unit is covered by 3-year / 3,000-hour warranty