General Specifications

• Misting head with 17 nozzles mounted on 15-foot boom.
• Nozzles can be added or removed to suit the application.

 Electrical Specifications

• U.S.: 3 Phase / 480 Volt / 60 Hertz
• Full load current is 12 amps. Recommended minimum gen set is 25 Kw.
• 100 foot (30.48 meters) 10/4 electrical cord. Other options available.
• No male plug, "bare wired" is standard. Any plug is extra cost.
• Cabinet with control panel.

 Water Specifications

• 18-24 GPM at 200 PSI of output.
• 10 PSI required from fire hose hookup (when using the booster pump).
• Filter is included and should be used at all times. Contact us for recommendations when using nonpotable water.(Filter system in-line 30 mesh 595 micron).
• Droplet size of 50-200 microns.
• Throw is dependent on wind conditions. Approximately30 feet (9.14 meters) on a quiet day.

Dimensions

• Standard boom height is 15 feet tall when mounted on skid. Units can be fabricated on booms ranging from 4 to 15 feet in height.

 Maintenance

• If using potable water, nozzles need to be inspected once a year.

 Chemical Additives

• Can be used with surfactant to improve binding of dust particles or with tackifying agents to seal the ground to prevent dust from becoming airborne.
• Odor control chemicals can be used to help eliminate odor.

Options

• Dosing Pump can be added to the unit for chemical applications.

 Warranty

• Unit is covered by 3-year / 3,000-hour warranty.