• 30,000 CFM (849.50 CMM) generated by 25 HP fan.
  • 21,000 square feet (1,950 square meters) coverage. Nearly 125,000 square feet (11,613 square meters) coverage available with optional 359° oscillation.
  • Oscillator gives 0-40° of movement. Unit can also be equipped with optional 359° oscillation.
  • Adjustable angle of throw 0-50° of height adjustment.
 
  • U.S.: 3 Phase / 25 HP fan / 480 Volt / 60 Hertz. Full load current is 46 amps. 60 Kw gen set is recommended. Motor is designed with a 1.15 service factor capable of operating at +/- 10% of design voltage.
  • Other motor options available, including all international electrical motors:
    • 3 Phase / 25 HP fan /380 Volt / 50 Hz (Europe, Middle East, N. Japan, Latin America)
    • 3 Phase / 25 HP fan /400 Volt / 50 Hz (Europe, Japan, New Zealand, Australia)
    • 3 Phase / 25 HP fan /415 Volt / 50 Hz (Europe, New Zealand, Australia)
    • 3 Phase / 25 HP fan /575 Volt / 60 Hz (Canada)
    • 3 Phase / 25 HP fan /380 Volt / 60 Hz Korea)
    • 3 Phase / 25 HP fan /440 Volt / 60 Hz (Mexico)
  • 380, 400, 415 volt / 50 Hz motors are designed with a 1.00 service factor capable of operating at +/- 10% of design voltage.
  • 10 HP (7.5 Kw) high pressure booster pump with no lift.
  • 1/8 HP (0.10 Kw) oscillator.
  • 150 foot (45.72 meters) 6/4 electrical cord. Other options available.
  • No male plug, "bare wired" is standard. Any plug is extra cost.
  • Cabinet with control panel.
 
  • 10PSI (0.69 BAR) constant pressure needs to be delivered to booster pump. Maximum inlet water pressure should not exceed 100 PSI (6.89 BAR) when operating the booster pump.
  • Maximum PSI delivered by booster pump is 200 PSI (13.79 BAR).
  • Filter is included and should be used at all times. Contact us for recommendations when using nonpotable water. (Filter system in-line 30 mesh 595 micron).
  • 1-1/2" (38.10 mm) cam-and-groove quick disconnect female coupling for fire hose provided on machine.
  • 30 brass nozzles (also available in stainless and nylon).
  • Droplet size of 50-200 microns.
  • Throw 200 feet (60 m).
 

Quick Links

Printer-Friendly Page

Get Adobe Reader
 

on standard wheeled carriage

  • 6.75 feet (81 inches; or 2.06 meters) wide.
  • 9.75 feet (117 inches; or 2.97 meters) long.
  • 7.17 feet (86 inches; or 2.19 meters) tall.
  • 1800 lbs. (816.50 Kilograms).
 
  • If using potable water, nozzles need to be inspected once a year.
  • Fan motor and high pressure pump should be greased every 10,000 hours.
  • Oscillator bearing should be greased on a regular maintenance schedule, or as needed.
 
  • Can be used with surfactant to improve binding of dust particles or with tackifying agents to seal the ground to prevent dust from becoming airborne.
  • Odor control chemicals can be used to help eliminate odor.
 
  • Unit is available with optional 359º oscillation. Standard oscillation provides 0-40º of movement.
  • Available on frame with skid mount. Unit comes standard on wheeled carriage.
  • Dosing Pump can be added to the unit for chemical applications.
 
  • Unit is covered by 3-year / 3,000-hour warranty.