• 18,000 CFM (510 CMM) generated by 15 HP fan.
  • 12,000 square feet (1,115 square meters) coverage. More than 74,000 square feet (6,875 square meters) coverage available with optional 359° oscillation on carriage-mounted units.
  • Oscillator gives 0-40° of movement. Unit can also be equipped with optional 359° oscillation when mounted on optional wheeled carriage.
  • Adjustable angle of throw 0-50° of height adjustment.
 
  • U.S.: 3 Phase / 15 HP fan / 480 Volt / 60 Hertz. Full load current is 21 amps. 30 Kw gen set is recommended. Motor is designed with 1.30 service factor capable of operating at +/- 10% of design voltage.
  • Other motor options available, including all international electrical motors:
    • 3 Phase / 15 HP fan / 380 Volt / 50 Hz (Europe, Middle East, N. Japan, Latin America)
    • 3 Phase / 15 HP fan / 400 Volt / 50 Hz (Japan, New Zealand, Australia)
    • 3 Phase / 15 HP fan / 415 Volt / 50 Hz (Europe, New Zealand, Australia)
    • 3 Phase / 15 HP fan / 575 Volt / 60 Hz (Canada)
    • 3 Phase / 15 HP fan / 380 Volt / 60 Hz (Korea)
    • 3 Phase / 15 HP fan / 440 Volt / 60 Hz (Mexico)
  • 380, 400, 415 Volt / 50 Hz motors are designed with a 1.00 service factor capable of operating at +/- 10% of design voltage.
  • 1/8 HP (0.10 Kw) oscillator.
  • 150 foot (45.72 meters) 8/4 electrical cord. Other options available.
  • No male plug, "bare wired" is standard. Any plug is extra cost.
  • Cabinet with control panel.
 
  • 40-50 PSI (2.78-3.45 BAR) constant pressure needs to be delivered to the unit. Maximum inlet water pressure should not exceed 100 PSI (6.89 BAR) if unit is equipped with the optional booster pump, or unit may be damaged.
  • Filter is included and should be used at all times. Contact us for recommendations when using nonpotable water. (Filter system in-line 30 mesh 595 micron).
  • 1-1/2" (38.1 mm) cam-and-groove quick disconnect female coupling for fire hose provided on machine.
  • 18 brass nozzles (also available in stainless and nylon).
  • Droplet size 50-200 microns.
  • Throw 150 feet (45 meters)
 

Quick Links

Printer-Friendly Page

Get Adobe Reader
 

ON STANDARD FRAME WITH SKID MOUNT

  • 6.33 feet (76 inches; or 1.93 meters) wide.
  • 5.88 feet long (70.5 inches; or 1.79 meters)
  • 6.92 feet tall (83 inches; or 2.11 meters)
  • 1800 lbs. (816.50 kilograms)
 
  • If using potable water, nozzles need to be inspected once a year.
  • Fan motor and optional high pressure pump should be greased every 10,000 hours.
  • Oscillator bearing should be greased on a regular maintenance schedule, or as needed.
 
  • Can be used with surfactant to improve binding of dust particles or with tackifying agents to seal the ground to prevent dust from becoming airborne.
  • Odor control chemicals can be used to help eliminate odor.
 
  • 10 HP (7.50 Kw) high pressure booster pump (with no lift) can be added to unit.
  • Available on wheeled carriage. Unit comes standard on frame with skid mount.
  • Unit is available with optional 359° oscillation when mounted on optional wheeled carriage. Standard oscillation provides 0-40° of movement.
  • Dosing Pump can be added to the unit for chemical applications.
 
  • Unit is covered by a 3-year/3,000-hour warranty.